Types Of Single Girder Overhead Cranes

AQ-LD model single girder overhead crane is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1 model and MD1 model electric hoist as a complete set, it is light duty crane with the capacity of 1-20 tons. The span is 7.5-28.5m, working grade is A3-A4. Working temperature is -25℃-40℃. This type of crane is widely used in plants, warehouse, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosive environment.

Get a Free Quote

The single girder crane has two operational methods, ground or operational room which has open model and closed model and can be installed on left or right side according to the practical situation; and the direction of entering the gate has two forms, side-way and ends in order to satisfy the users, choice under different conditions.

AQ-HD European type single girder crane with light dead weight, small wheel pressure and reliable performance is easy to operate. Small wheel pressure and margin can cut down earlier stage project investment of workshop, low noise, low energy consumption, energy conservation and environmental protection. Wear well can lower maintenance and maintenance costs.

Get a Free Quote

AQ-LX model single girder suspension crane and CD1 or MD1 type electric hoist are used together as a complete set. It is a light duty track traveling crane with trajectory which applies to and used at machinery assembling sites and warehouses. This kind of crane usually adopts ground controlling and works at a temperature of -20℃ to 40℃. It is prohibited to use the equipment at combustible, explosive or corrosive environment.

Get a Free Quote

AQ-LDZ electric single girder grab crane works together with hoist grab trolley, and its lifting capacity is from 2ton to 10ton. The grab crane is used to grab all kinds of loose materials. The lifting capacity include the dead weight of the grab.

Get a Free Quote

AQ-LDP model electric single girder overhead crane belongs to very low clearance light duty lifting equipment. Electric hoist is at one side of main girder, which can increase the service space of hook and reduce the cost. With advantages of big trolley tread, smooth traveling, tight structure, strong rigidity, delicate operation, low noise, safety and reliability and beautiful exterior, it is widely used in the situation that the clearance height of workshop is low and the operating ambient temperature is -25℃-40℃.

Get a Free Quote

AQ-LDP model single girder crane is designed and produced according to GB/T3811-2008, JB/T1306-2008 standard and used with CD1, MD1 model hoist. It is a light duty crane with rated load of 3-10tons. The span is 7.5-22.5m, working grade is A3-A4, and lifting height is 6-12m. The main operating method is ground control (ground control, remote control, ground control + remote control), if the client has special requirement, we can do non-standard design according to the requirements.

Please feel free to send inquiry or email to us.
(Fields marked by an asterisk (*) are required fields.)

    Name:*

    Email:*

    Phone:*

    Country

    Message:*